Wheelchair Boot Hoist & Scooter Boot Hoist
Need Mobility Scooter & Wheelchair Hoists for your car?
The boot hoist can be used to lift power chairs and scooters up to a weight of 150Kg in and out of the boot area of estate cars, MPV type vehicles, 4x4s and some hatchbacks. A power in/out option is available to aid full control when manoeuvring heavy wheelchairs in and out of the storage area. The hoist assembly can be easily removed and refitted to the back of the vehicle when extra space is required. All mounting frames are installed neatly to the side of the vehicle and powered directly from the vehicle’s battery, which is protected from overload by a fuse and a current limiting device within the main control box. Our specially designed keyhole plates enable easy single handed attachment of the wheelchair or scooter to the hoist.
40kg 2way Hoist
This hoist is reliable and compact; it can be used to lift small motorised scooters and manual wheelchairs of up to 40 kilograms.
The hoist can be neatly installed to either the nearside or offside rear corner of the vehicles boot area. It’s suitable for most type of vehicles, including hatchbacks, estates and saloon cars. The boom and upright arm have a unique folding design. This enables you to fold the post neatly when not in use.
To control the hoist’s Up and Down movement, you can either use the built-in control located on the main body of the hoist, or use the attached two-way handset, which is designed for easier usage.
An interlock system ensures that the lifting arm is locked in the up position before the hoist can be operated.
80kg-150kg Programmable 4way Boot Hoist
The boot hoist is a mechanical device fitted in the boot of the car to assist lifting a manual wheelchair, electric wheelchair or mobility scooter into the boot easily.
It is powered by the vehicle’s battery and has the capability to lift from 80 up to 150 kilos.
This boot hoist can be supplied in 4 different lifting capacities 80kg 100kg 120kg or 150kg.
It can be fitted in estate, multi-purpose family vehicles and larger 4wheel drive vehicles.
This Boot Hoist has unique features, which allows the user to easily programme a loading cycle. Users can pre-set a loading position for your wheelchair or scooter and then the hoist will load them into your car accurately as programmed.
To programme the loading position, you need to first load your wheelchair or scooter in the correct place in your vehicle, by using the UP, DOWN, IN, and OUT, buttons on the handset. Once the arm of the hoist is in the correct position, Press and Hold both the IN and OUT buttons on the handset simultaneously for 5 seconds until the indication light flashes.
Now the loading position has been recorded into the control box of the hoist, from now on, each time when loading the wheelchair or scooter, the hoist’s arm will stop at the perfect position as programmed.
The loading position can always be reset as many times as you require. Once the loading cycle is finished, you can remove the spreader bar and re-press the IN button on the handset, this will drive the hoist arm in even further to achieve a clearer view in the vehicle’s rear-view mirror.
When the hoist is not in use the handset clips nicely onto the bracket on the hoist arm. The hoist will automatically switch off, if no button has been pressed in the last 25 seconds.
The Telescopic 120kg boot hoist introduces further simplicity and safety by its single button one hand operation. The automated sequencing can be stopped or reversed at any time and there is no requirement to guide the wheelchair or scooter thus allowing the user to relax during the whole load or unload cycle. This hoist can be fitted to estate cars, M.P.V. and 4×4 vehicles.